RANCANG BANGUN PENGONTROL GERAKAN ROBOT OPENMANIPULATOR DENGAN MATLAB

Authors

  • Daniel Kelvin Winarta Universitas Ma Chung
  • Romy Budhi Widodo Universitas Ma Chung
  • Mochamad Subianto Universitas Ma Chung

DOI:

https://doi.org/10.33479/sb.v5i1.343

Keywords:

dynamixel, MATLAB, OpenManipulator, robot arm

Abstract

With the advancement of science, society demands industry to make a product with good quality and produced in a short time. Because of this demand, many industries have switched from manual production processes to automated production processes so that the products produced have consistent quality and are quickly produced. One of the most widely used technologies today is the robot arm. This study aims to create a robot arm motion control application using the MATLAB application. The robot arm used consists of several devices, namely the U2D2 board, power adapter, and servo dynamixel. Prototype testing is carried out by moving the position of the robot arm according to the predetermined position. The test was 100% successful in carrying out all the movements of moving the robot arm position, although improvements still need to be made so that the robot arm can function better in the future. 

Downloads

Download data is not yet available.

References

Muslim, A. I. (2022, Oktober). ROBOT.

Oktama, R., Maulana, R., & Setyawan, G. E. (2018, Agustus). mplementasi Robot Lengan Pemindah Barang 3 DOF Menggunakan Metode Inverse Kinematics. Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, 2(8), 2810-2816.

Pamungkas, D. S., & Noviansyah, M. S. (2021, November). Simulator Robot Lengan Dua Derajat Kebebasan. Seminar Nasional Terapan Riset Inovatif (SENTRINOV) ke-VII : Series: Engineering and Science, 7(1), 51-57.

Prastiwi, M., & Ihsan, D. (2021, November). Siswa, Seperti Ini Cara Kerja Robot dan Jenisnya. Dipetik Agustus 2024, dari KOMPAS.com: edukasi.kompas.com

Sari, R. P. (2024, Maret). Mengenal Apa itu Robotik? Pengertian dan Contohnya. Retrieved Mei 2024, from Cloud Computing Indonesia: www.cloudcomputing.id

Setyaningrum, P. M. (2021, Oktober). Penggunaan dan Manfaat Lengan Robot dalam Bidang Industri. Dipetik Agustus 2024, dari WartaEkonomi.co.id: wartaekonomi.co.id

Sirojuddin, Adigutama, Y., Syaefudin, E. A., & Fatah, M. I. (2022). Desain Kontrol Robot Manipulator Kapasitas 1.25 kgf. Rekayasa Mesin, 13(3), 675-688.

Downloads

Published

2024-09-29